Route-map "as-path prepend" not modelled in NXOS REST API?
I am working on a project automating our switch frabric using the NXOS REST-API.
I have hit what, for me would be a major issue, in that the following command syntax does not appear to be modeled in the REST API DME?
route-map TEST permit 10
set as-path prepend 100 100 100
If I add this command to a route-map and then GET the configuration for it from the switch there is no child of 'rtmapEntry' returned that corresponds to it. Further if I paste CLI as above into the NX-API Developer Sandbox console it tells me the following:
Error in 1 of 9 commands:
cmd: " set as-path prepend 200 200"
msg: Invalid params
% The command is not modeled
So it looks like there is no way to do this from the REST API? I am using a physical 93180YC-EX switch on 7.0(3)I7(4).
Can anyone confirm this is the case? Or does anyone have any knowledge on whether this might be modeled in an upcoming release?
Right now I'm left thinking I will need to scrap using the API and go back to CLI templates, which would really suck :(
Task NameCIDR CalculatorDescriptionGets the CIDR number from a subnet mask, pretty usefull to avoid to input both when some tasksneeds the subnet mask and other the CIDR.PrerequisitesTested on 5.1CategoryWorkflowComponentsUser InputsSubnet MaskInstruction...
This blog was generated from CDN blog Created by: Jeffrey Silberman on 25-10-2012 05:55:40 PMIntroductionRacktables version 0.20.1 has new feature support for Cisco UCS environments. Racktables is a structured and robust open-source solution ...
This blog was generated from CDN blog Created by: Eric Williams on 20-07-2012 12:19:56 AMI just added a new section to the UCS PowerTool section on the UCS CDN site that will provide a central repository of PoSh scripts, examples, and videos that detail ...
This blog was generated from CDN blog Created by: Eric Williams on 08-03-2012 04:25:30 PMI would like to announce the general availability of goUCS version 2.0 on Cisco Developer Network. A lot of time and effort has been put into the newest goUCS releas...
This blog was generated from CDN blog Created by: John McDonough on 10-11-2011 01:21:02 PMLest anyone thinks I have forgotten about my blogging on the UCS API, I have not, but I have written a blog recently for the Data Center blog and it is applicable t...