1. If Box A runs version 6.2(6) and Box B runs 7.3(5) can they work together without problem?
BB - this is not advised any time in production, technically if one fails other should able to support all the features of the device, so different code have some limitation, so suggest to have both same codes while we doing Active /Standby or Active /Active kind of setup like vPC.
2. Any suggestion if they are running in different OS?
BB - there is no suggestions, until your intention to bring network or make it as Lab testing to support cisco.
Look at the release notes bring the lower version to the same as other kit and join them in vPC (make sure you take the backup configuration in case you looking to rollback)
Data Center Knowledge Base
For one-on-one help with these products, you can open a ticket at https://developer.cisco.com/site/support/. For other products, please contact Cisco TAC at https://www.cisco.com/c/en/us/support/index.html
In this introduction instruction video, HyperFlex 4.0 API Explorer will be explained and how you can use the HX API Explorer to automate an application.
Where to start with getting an Access Token and how to get datastores showed via API calls.
Task NameCIDR CalculatorDescriptionGets the CIDR number from a subnet mask, pretty usefull to avoid to input both when some tasksneeds the subnet mask and other the CIDR.PrerequisitesTested on 5.1CategoryWorkflowComponentsUser InputsSubnet MaskInstruction...
This blog was generated from CDN blog Created by: John McDonough on 02-08-2011 03:05:49 PMA KVM launch link for a UCS blade or rack mount server is accessible via the UCS Manager interface and the url http://<ucs-ip-address>/ucsm/kvm.htmlKVM access...
This blog was generated from CDN blog Created by: John McDonough on 11-05-2011 10:05:50 AMSometimes an API is not able to do everything that is needed by administrators. Occasionally there may be a task that needs to be performed on a regular basis or an...