cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
208
Views
0
Helpful
1
Replies

Wireless Controller

botanicplc
Community Member

which Cisco controller satisfies these specs?
Access Points: Up to 6000

Wireless Clients: Up to 64,000

Throughput: Up to 80 Gbps

WLANs: 4096 VLANs: 4096

Form Factor: 2RU

Protocol support:

CCKM Fixed Uplinks: 1G SFP, 10G SFP+

Modular Uplinks: 10G , 40G , 100G QSFP

Console Ports: RJ-45 and USB 3.0

Management Port: RJ-45 (Service Port)

Redundancy Ports: RJ-45 and SFP GE for SSO

Wireless Standards: 802.11a/b/g/d/e/h/n/k/r/u/w/ac (Wave 1 & 2), 802.11ax (Wi-Fi 6) Storage: 240 GB SATA SSD Management Methods: HTTP/HTTPS, SSH, Telnet, SNMP, NETCONF

SFP Support: 1G / 10G / 40G / 100G (Hot-swappable)

Security: WPA, WPA2, WPA3; IPsec, DTLS, TLS; MACsec; RADIUS & TACACS+ Operating Temperature: 0° to 40°C (up to 50°C short-term)

Humidity: 10%–90% non-condensing Operating Altitude: 0 to 3000 m

Power Input: 90–264 VAC, 47–63 Hz

Power Consumption: Up to 381W (600W with modules)

Redundant PSU: Supported (Hot-swappable)

Heat Dissipation: 1300 BTU/hr

Warranty: 3 Years Warranty and support

1 Reply 1

aleabrahao
Meraki Community All-Star
Meraki Community All-Star

I would suggest the CW9800h1 or h2.

However, I also recommend contacting your Cisco sales representative to better understand your specific situation.

 https://www.cisco.com/c/en/us/products/collateral/networking/wireless/wireless-lan-controllers/cat-cw9800h1-cw9800h2-wireless-controllers-ds.html

I am not a Cisco employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.