cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1229
Views
0
Helpful
4
Replies

ASR 1001-X ROUTER ip sec lic

saravanan93
Level 1
Level 1

Hi,

 

I have a problem with a licence for ASR 100-x  router, We buy for our client 2 licence 

The licences are : adventerprise and IPSEC.

 

After installing the licences on the box,

we do reload 

the show licence give us this output:

 

router #sh lic
Index 1 Feature: adventerprise
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium

Index 19 Feature: ipsec
Period left: Life time
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium

 

it shows that ip sec lic active but not in use 

help on this 

 

thanks/regards

 

saravanan

1 Accepted Solution

Accepted Solutions

IOS XE image is k9, so it's okay.

Perhaps you need to apply the ipsec setting to make the license "License State: Active, In Use".

View solution in original post

4 Replies 4

shimenoy
Spotlight
Spotlight
Hi :)

What is the filename of IOS XE ?

hi ,

IOS XE file;

asr1001x-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.bin

for your refrence;
Router #sh ver
Cisco IOS XE Software, Version 03.16.04b.S - Extended Support Release
Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S4b, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Mon 17-Oct-16 19:43 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2016 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON

sg-bap-singa-co-01 uptime is 1 hour, 22 minutes
Uptime for this control processor is 1 hour, 22 minutes
System returned to ROM by reload at 19:04:44 UTC Wed Jun 20 2018
System image file is "bootflash:/asr1001x-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.b"
Last reload reason: PowerOn



This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

License Level: adventerprise
License Type: Permanent
Next reload license Level: adventerprise

cisco ASR1001-X (1NG) processor (revision 1NG) with 3729032K/6147K bytes of memory.
Processor board ID FXS2141Q2Z2
6 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
6594559K bytes of eUSB flash at bootflash:.

Configuration register is 0x2102

IOS XE image is k9, so it's okay.

Perhaps you need to apply the ipsec setting to make the license "License State: Active, In Use".

hi,

thanks for your reply,
could you please share the procedure to make the license active, in use ?
thanks


Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: