OnPlus Discovery and Nexus 5548

[ianmccusker]

Hi,

I've just installed an OnPlus agent for a customer who has a Nexus 5548 with a Layer 3 daugthter card as their core switch but the agent isn't discovering any devices beyond the vlan it is sitting in.  Does anyone have any experience with the OnPlus ageent and Nexus switches.  It's obviously not a supported Cisco device but I've configured login credentials and snmp access to the switch on the portal but still nothing is being discovered.  Any advice greatly appreciated.

Regards

Ian

[aqkazi · Accepted solution]

Hi Ian,

To discover multi-VLANs, connect the On100 to an 802.1q trunk port. This will allow the On100 to discover other VLANs. It is currently connected to an access port which is limiting the broadcast traffic from the other VLANs.

Although the device isn't currently supported, it should be discovered and allow basic support that we provide for all discovered devices.

Thanks,

The OnPlus Team

[ianmccusker]

Hi,

Many thanks.  I just read your newsletter after I posted and noticed it now supports 802.1q trunks.  I'll give that a try.

Regards

Ian

[aqkazi]

Excellent, thank you for highlighting the correct answer. Keep us updated once you have it configured.