WAP321

[CHRIS YEO]

Hi Guys,

The backup doesn't seem to work using the backup now button.  Does it work at all?

thanks!

Chris

[SHAWN EFTINK]

I'm assuming you input credentials and that the credentials are showing as working.  I don't have any WAN321's deployed out there, but I have a number of other devices at several sites that the backup is working perfectly.

[CHRIS YEO]

The WAP321 only allows you to put in the snmp access credentials, which I have put in.

[SHAWN EFTINK]

Understood.  Please see the Supported Devices and Feature Summary located here.

https://supportforums.cisco.com/docs/DOC-17501

The WAP321 is not currently listed as supported so the backup functionality is not currently available.

[CHRIS YEO]

They do have several links, including this one from April 2012:

https://supportforums.cisco.com/message/3620907#3620907

That indicate that even though it is not in the supported devices, that they do support some functionality on the device.

[SHAWN EFTINK]

Understood, and there is "some" functionality but it appears that it more relates to Wireless reporting than anything else.  If the device doesn't show up in the Supported Devices and Feature Summary link I referenced above, then odds are it won't support config backup.  That said, if it's only letting you enter SNMP, then it definitely won't support config backup as telnet/enable credentials are required for the ON100 to get a copy of the config.

[siufwong]

Dear Chris,

Don't know if you have the problem resolved, I've one WAP321 being managed with SNMP read/write credential added to the ON100. I can successfully backup the configuration to the portal and able to upgrade the fireware as well.

Hope this help,

Siufai