Umbrella VA with Anycast and ACI Fabric

[Michael Bartholomæussen]

Hi All

I'm looking to configure Anycast from the UmbrellaVA using ACI as fabric.

But I'm unsure about the approach. I've found the guide below for Anycast services in ACI, but the Umbrella VAs is setup with a BGP Peer

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/kb/b_Cisco_APIC_and_Anycast_Services.html

If the VAs should peer with ACI, what should the construct look like regarding L3outs, Logical Node Profiles and so on.

Any thoughts or experience is appreciated

[kendang]

Hey Michael Bartholomaussen,

If you are using Cisco Umbrella VA's, I recommend opening a case with Umbrella support (https://support.umbrella.com/hc/en-us/articles/360044216911-How-to-Contact-Umbrella-Support) to help out with that question. This community is geared towards consumer OpenDNS which won't have access to Cisco Umbrella features.