cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1836
Views
0
Helpful
21
Replies
Highlighted
Beginner

Facility High Rx Power on 10DME card

Hi all

I found message "Facility high Rx Power" on 10DME card. So, I need to know what is the root cause and reason to get the message. Please give me the idea or comment.

Thanks

V

Note: Please see the picture from attach file

21 REPLIES 21
Highlighted

Hi Sunil

From the table, which one is relate with my card. Because I see OSNR, FEC Type, Pre-FEC BER, POST,FEC BER

that how i know my card is relate with  T_T

Thanks

V

Highlighted

i think the first two row.

check for "Input Power Sensitivity"

-8 to -20 dBm C-band 


Highlighted

Hi Sunil

So, I just change RX power high value in optics threshold > choose type "alarm" > and change to be -4 or -5, correct?

so, what is type "TCA" in optics thresholds? because i found the value is not match in alarm type.

Thanks

V

Highlighted

yeah thats correct.

TCA threshold is for threshold crossing alerts, if you go to Alarm tab -- filter -- click on "NA" option, that is for threshold.

these threshold alarms you will see in purple colour.

Highlighted

Still confuse about threshold crossing alerts. What is the main object for crossing alerts? is it difference with alarm ?

Thanks

V

Highlighted

TCA - Threshold crossing alert, they are also a kind of alarms but you can take them as a type of warnings.

Alarms - they are alarms indicating something is severely impacted.

so we have different thresholds under each card and ports for raising TCA and alarms.

Highlighted

Hi Sunil

I am clear....

Thanks with your great support

V

Content for Community-Ad