cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
888
Views
0
Helpful
0
Replies
harindhafdo
Beginner

LMP between M6 and ASR9K

Hi All,

I am trying to build a LMP control channel between M6 chassis and ASR9K but it is not successful. below is my setup details

M6(R9.8) EMS (10.10.1.17) port connects to a switch, then ASR9K (4.2.1) Mgmt0 (10.10.1.27) also connects to same switch same VLAN and CTC PC is 10.10.1.100 connected to same VLAN.

I followed the procedures given in below link, but I don't get success while creating the LMP control channel. when I checked in the router I could see two ssh sessions from CTC PC but not from M6 Chassis.

http://www.cisco.com/en/US/docs/optical/15000r9_8/dwdm/configuration/guide/454d98_turnupnetwork.html#wp595598

Can anyone shed some light on this please ?

RGds

Harin

0 REPLIES 0
Content for Community-Ad
This widget could not be displayed.