Not to my knowledge. Remember the S in SONET stands for Synchronous. Ethernet transport is inherently not synchronous and is thus not suited as a candidate technology an alternative for SONET transport.
There is Packet Over SONET (POS), a technology for encapsulating Ethernet and transporting the frames on a SONET underlay. Also, the 10 Gbps Ethernet WAN Phy uses a lightweight version of the OC-192 SONET frame type so there is some possibility of carrying Ethernet over a SONET network in that manner.
I think I found additional information, which has a different terminology actually, that is CESoP (Circuit Emulation Services Over PSN). The M3600, ASR901 and ASR903 all support CESoP, but have limited OC3 and OC12 ports.
Hi, here is an example how to configure IP-NAT, GRE, IPSEC. I've seen plenty of questions and this might be a good solution! (Mostly the use of commands that might remind u) IP NAT======================================================================...
Hi everyone.I have a problem in my Network.So i have 3 routers and a firewall in my topology. I have configured OSPF and all routers works expect R3 (see in the image below)When I watch my neignbor in R3 it says :192.168.7.7 1 INIT/DROTHER 00:00:37 10.0.2...
Host Onboarding is the term used when connecting an endpoint (hosts , IOT , Other devices) to the fabric , and can be accomplished in a couple of ways.One option is the "static" approach as oppose to the dynamic and secure approach using&nbs...
good morning I have this report from users, saying that they encounter connection issue only when they are wired , but the wireless I fine. both connection are using the same path to the internet ...please advised a troubleshooting plan.