cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

360
Views
0
Helpful
2
Replies
Beginner

QSFP-40G-SR4 and OM4 fiber

Hello,

is my QSFP-40G-SR4 OK with OM4 fiber MPO connector cause Link length supported OM4 is not mentioned under interface transceiver information,

 


transceiver is present
type is QSFP-40G-SR4
name is CISCO-LUMENTUM
part number is JQPR04SRAB2NFCS
revision is 01
serial number is xxxxxxxxxxx
nominal bitrate is 10300 MBit/sec per channel
Link length supported for 50/125um OM2 fiber is 30 m
Link length supported for 50/125um OM3 fiber is 100 m
cisco id is --
cisco extended id number is 16
cisco part number is 10-2672-03
cisco product id is QSFP-40G-SR4
cisco vendor id is V03

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Guru

Re: QSFP-40G-SR4 and OM4 fiber

Yes it is supported with OM4 fiber:

"The Cisco 40GBASE-SR4 QSFP Modules support link lengths of 100 meters and 150 meters, respectively, on laser-optimized OM3 and OM4 multimode fibers. It primarily enables high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP multifiber female connectors. It can also be used in a 4x10G breakout mode for interoperability with 10GBASE-SR and SFP-10/25G-CSR-S (in 10G mode) interfaces up to 100 and 150 meters on OM3 and OM4 fibers, respectively."

Reference: https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/data_sheet_c78-660083.html

View solution in original post

2 REPLIES 2
Highlighted
Hall of Fame Guru

Re: QSFP-40G-SR4 and OM4 fiber

Yes it is supported with OM4 fiber:

"The Cisco 40GBASE-SR4 QSFP Modules support link lengths of 100 meters and 150 meters, respectively, on laser-optimized OM3 and OM4 multimode fibers. It primarily enables high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP multifiber female connectors. It can also be used in a 4x10G breakout mode for interoperability with 10GBASE-SR and SFP-10/25G-CSR-S (in 10G mode) interfaces up to 100 and 150 meters on OM3 and OM4 fibers, respectively."

Reference: https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/data_sheet_c78-660083.html

View solution in original post

Beginner

Re: QSFP-40G-SR4 and OM4 fiber

Great thanks Marvin
CreatePlease to create content
Content for Community-Ad
FusionCharts will render here