cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
28316
Views
65
Helpful
10
Replies
Highlighted

SFP-10G-LR-S vs SFP-10G-LR

Ciao,

is there anyone that can explain what is (are) the difference(s) between the two optics in the title ?

In particular what are the "unnecessary features" of the SFP-10G-LR-S ? Can they be used in UA to Core deployment ?

(http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/bulletin-c25-733742.html)

 

BR,

Luciano

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Guru

The table below shows the key

The table below shows the key feature differences for the 10 Gbps S-class vs. C-class.

For UA to core campus applications, S-class are quite suitable.

 

C-Class

S-Class

Multi-rate vs Single-rate

Multi-rate optics:

  • Ethernet
  • OTN
  • WAN-PHY

Single-rate optics:

  • Ethernet only

Operating temperature range

  • Commercial (0C to 70C)
  • Extended (-5C to 85C)
  • Industrial (-40C to 85C)
  • Commercial (0C to 70C) only

View solution in original post

10 REPLIES 10
Highlighted
Hall of Fame Guru

The table below shows the key

The table below shows the key feature differences for the 10 Gbps S-class vs. C-class.

For UA to core campus applications, S-class are quite suitable.

 

C-Class

S-Class

Multi-rate vs Single-rate

Multi-rate optics:

  • Ethernet
  • OTN
  • WAN-PHY

Single-rate optics:

  • Ethernet only

Operating temperature range

  • Commercial (0C to 70C)
  • Extended (-5C to 85C)
  • Industrial (-40C to 85C)
  • Commercial (0C to 70C) only

View solution in original post

Highlighted

Dear Marvin,thanks for you

Dear Marvin,

thanks for you kindly replay.

May I ask you where did you find the above table ?

 

BR,

Luciano

Highlighted
Hall of Fame Guru

You're welcome.It is from an

You're welcome.

It is from an FAQ developed internally at Cisco and provided to the partner community to assist in product presales positioning.

If it answers your question, please mark as such. Thanks.

Highlighted
Beginner

Hi Team,

Hi Team,

Can anyone support if N3548 support 10G classic transceivers (SFP-10G-LR-S=)?

Regards,

Neeraj

Highlighted
Hall of Fame Guru

They are not listed as

They are not listed as supported in the compatibility matrix.

Highlighted
Beginner

Please note that the S Class

Please note that the S Class SFP's doesn't support FCoE.

Highlighted
Beginner

Re: The table below shows the key

how do you tell when looking at the part number if it is S class or C class or can you even do that. If not where is the class specified per part number in the data sheet?

Highlighted
Hall of Fame Guru

Re: The table below shows the key

S class transceivers have "-S" at the end of the SKU (Stock Keeping Unit, also known as part number).

SFP-10G-SR = most common non-S-class 10 Gbps transceiver

SFP-10G-SR-S = S-class version of the same

To check compatibility with your equipment, use this tool:

https://tmgmatrix.cisco.com/

Highlighted
Beginner

I was wondering the same

I was wondering the same thing. I'm looking for SFP+ modules to go from core to building distribution switches, and the cost of migrating from 10G X2 modules to SFP+ is insane!!

Highlighted

The Cisco S-class optics is

The Cisco S-class optics is compatible with non s-class optics, except that S-class optics has different temperature ranges. 

And if you want to replace the X2 module with original SFP+ module, the total cost is high, but you can find a OEM vendor to help you out. I have bought compatible Cisco SFP+ modules from Fiberstore for just $16. You can have a try !

CreatePlease to create content