cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
230
Views
20
Helpful
5
Replies
Highlighted
Beginner

Slow Speed over MPLS network

sh int gi 0/1 | inc erro 
692945 input errors, 1 CRC, 0 frame, 692943 overrun, 0 ignored 
0 output errors, 0 collisions, 0 interface resets 

 

customer reported Intermittent dropouts and slow speed on their MPLS links

can anyone help me to troubleshoot the MPLS connection?( above attached the one of the site connected port)

Everyone's tags (1)
5 REPLIES 5
VIP Mentor

Re: Slow Speed over MPLS network

You've got over subscription of the interface there , 2 much traffic going into the interface , cant handle it , its a hardware limitation
You could try QOS if not already in place

692943 overrun
Beginner

Re: Slow Speed over MPLS network

Hi

Thanks for the reply later we have found out that customer end provider connection issue

Regards,
Julie
VIP Mentor

Re: Slow Speed over MPLS network

Great :)
Hall of Fame Expert

Re: Slow Speed over MPLS network

Hello Juliet,

I agree you have input errors of type overrun .

This means this device gi0/1 is receiving traffic with bursts that it cannot handle.

Typically this may happen on software based routers that can have gigaE interface that do not operate at line speed.

To minimize the problem, the device on the other side of the link should apply some type of output shaping to a sub rate of 1000 Mbps so that the other side can receive all the frames.

This kind of feature is available also on multilayer switch like C3560 that can set the output bandwidth to a percentage of line speed.

Hope to help

Giuseppe

 

VIP Expert

Re: Slow Speed over MPLS network

What's the device?

As the others have noted, the receiving hardware cannot keep up with the actual input data stream. Does the interface's input queue also show drops?
CreatePlease to create content
Content for Community-Ad