cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
284
Views
0
Helpful
2
Replies
Highlighted
Beginner

Using Cisco 10G SR sfp+ in C9500 24y4c-e

Dear all,

I have a problem when using 10g SR SFP+ in c9500 24y4c-e. I use that SFP module in 25ge native of c9500. The switch know that I am using 10g sfp but there is no optical signal at  transmit port of sfp as following picture

IMG_20210113_131247.jpg

IMG_20210113_131229.jpg

What I should do to get output on transmit port of sfp?

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

If you do Show log -- is there anything useful in there? IS there anything coded on the port configuration to speed other than 10000?

View solution in original post

2 REPLIES 2
Highlighted
Beginner

If you do Show log -- is there anything useful in there? IS there anything coded on the port configuration to speed other than 10000?

View solution in original post

Highlighted
Beginner

Hi Carl,

My problem is already solved. I change the ios xe version 16.9.04 to 16.12.04. After upgrade version all spf work normally. 

Thank you.

Content for Community-Ad