cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
393
Views
5
Helpful
1
Replies
Highlighted
Beginner

Which product is for replace the EOS 15454-OSCM

http://www.cisco.com/c/en/us/products/collateral/optical-networking/ons-15454-series-multiservice-provisioning-platforms/end_of_life_notice_c51-728080.html

 

The 15454-OSCM is end of sale.

But I haven't found any devices for replacement it.

 

Need help.

 

Thank you

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Beginner

Hi,Because 15454-OSCM and OSC

Hi,

Because 15454-OSCM and OSC-CSM are eol\eos I recomed you use GCC channels on transponders. When you use OSCM or OSC-CSM you get GCC only bandwidth 192 kbps, but when you use cards like 10x10 or Any Rate cards you will get 1200 kbps. 

To create GCC without OSC channel you need:

- DCN, I mean LAN connection between nodes 

- Create Side-to-Side PPC

- Create channel 10G

- Create GCC. Then you can delete DCN network

Other way migrate from M12 to M6 and use TNC card with CWDM SFP (1510 nm) for OSC channel.

View solution in original post

1 REPLY 1
Beginner

Hi,Because 15454-OSCM and OSC

Hi,

Because 15454-OSCM and OSC-CSM are eol\eos I recomed you use GCC channels on transponders. When you use OSCM or OSC-CSM you get GCC only bandwidth 192 kbps, but when you use cards like 10x10 or Any Rate cards you will get 1200 kbps. 

To create GCC without OSC channel you need:

- DCN, I mean LAN connection between nodes 

- Create Side-to-Side PPC

- Create channel 10G

- Create GCC. Then you can delete DCN network

Other way migrate from M12 to M6 and use TNC card with CWDM SFP (1510 nm) for OSC channel.

View solution in original post

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards