The question is about maximim link length using 10g-lrm over 62,5 micron fiber. Specs show it is up to 220 m but cisco recommends to use mcp on transmitters as i understand. Some other sources don't mention necessity of mcp. Need to deploy 10g on old fiber links up to 150 meters without mcps. And there is no opportunity to test it before. Please advise who experienced the same situation Thanks for advance
More : I've read that the maximum loss budget over the link is about 1,9 db and that the MCP itself would attenuate at least 2 db (it would be over the total loss budget, if so this standard would not have any usefulness...).
This standard is intended for legacy fiber optics like FDDI and OM1. Are there any guidelines that describe in which conditions such fiber will work with 10GBASE-LRM ?
- How many fibre junctions are allowed ?
- If there are more junctions, by which distance will it decrease the 220 m standard distance ?
- Are there any test method to check if a given link will pass or fail with 10GBASE-LRM ?
Cisco recently announced the availability of the IOS-XE train – IOS-XE Cupertino 17.7.1. This is a standard maintenance release supporting switching, wireless, SP-Access, Routing as well as IoT (Internet of things) platforms with a sustaining support life...
What is AppQoE?
AppQoE is a WAN optimization stack and optimizes WAN traffic for different use cases for applications that are deployed on-prem or in cloud.
What are the benefits of using AppQoE?
AppQoE improves application experience by d...
The application delivery challenges have been the enemy of network since the advent of Internet. So, what are these application delivery challenges that can bring down a network to its heels?
Above are some of the common problems faced not only by tradit...
It is our pleasure to officially announce the finalists in the 2021 IT Blog Awards. Now we are looking to YOU, our amazing tech community, to weigh in. Check out the amazing educational content we've uncovered and vote for your favorites before Friday, Fe...