03-23-2022 11:42 AM
Hello,
So I am a NOC intern and one of our engineers asked me to install this line card in our porting room. I thought I was being careful but managed to snap the plastic connector that helps hold the part in place. Guess I didn't have it pushed all the way in and pushed a little too hard on the plastic piece. I am wondering if its possible to get a replacement for it? The line card still seems to be secure but could cause problems trying to take it in or out again in the future. Thanks
Kevin
PS: I attached a picture of the plastic connector I am referring to.
03-24-2022 08:56 AM
- If it has a part number you can try ebay , seems to have a bar code it, scan or photograph it with a barcode scanning app on your phone, perhaps you will find more details , then again ebay may be source to launch a search for it.
M.
03-25-2022 07:43 AM
If you have any 15454 line cards that are non-functional, you might be able to harvest a tab from one of them and try to swap.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide