Both are in the TSC card.
An Equipment Boot Failure alarm occurs when a TSC card, SSXC card, or traffic (STM-N) card does not fully boot from the restart point after self-rebooting three times.
An Inbound Interconnection Control Bus 1 Failure on the TSC card, CXC card, or traffic (STM-N) cards occurs when one or more cards in the shelf experiences a control bus communication problem with the TSC card in Slot 10.
To Clear the EQPT-BOOT and control bus failure Alarm click this link.
http://www.cisco.com/en/US/products/hw/optical/ps4533/prod_troubleshooting_guide_chapter09186a00801f71a2.html#wp565128