cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
731
Views
0
Helpful
2
Replies

Open V-Cat in CTM 8.5

Stephen King
Level 1
Level 1

What version CTM, if any, will support open V-cat circuit provisioning?

1 Accepted Solution

Accepted Solutions

mayfwh
Cisco Employee
Cisco Employee

Hi,

Open VCAT circuits are possible starting in CTM 9.0.

The procedure is in the CTM 9.0 User's Guide, Chapter 7:

7.2.4.2  Creating a Regular or Open-Ended VCAT Circuit

http://www.cisco.com/en/US/docs/net_mgmt/cisco_transport_manager/9.0/user/guide/90servpr.html#wp1600580

To navigate, first open the User Guide, then click on the link for Chapter 7, then select the link for "7.2.4  Creating Circuits Using the Circuit Wizard" and lastly, scroll down to the link for the procedure for creating a VCAT circuit.

Hope this helps.

Will

View solution in original post

2 Replies 2

mayfwh
Cisco Employee
Cisco Employee

Hi,

Open VCAT circuits are possible starting in CTM 9.0.

The procedure is in the CTM 9.0 User's Guide, Chapter 7:

7.2.4.2  Creating a Regular or Open-Ended VCAT Circuit

http://www.cisco.com/en/US/docs/net_mgmt/cisco_transport_manager/9.0/user/guide/90servpr.html#wp1600580

To navigate, first open the User Guide, then click on the link for Chapter 7, then select the link for "7.2.4  Creating Circuits Using the Circuit Wizard" and lastly, scroll down to the link for the procedure for creating a VCAT circuit.

Hope this helps.

Will

Thanks Will,

More fodder to get  them to purchase 9.0..