cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1620
Views
5
Helpful
4
Replies

WS-C3850: Transceiver for Single Mode Fiber?

JSAT1
Beginner
Beginner

Hello,

My knowledge on switches is non existent. Please bear with me.

 

Problem: We have an existing Single mode fiber connected at the facility,

and are adding the C3850-24S-E switches as core switches and 3650s as distribution switches.

 

What Transceiver should I use? (we do not want to use media converters)

Will the GLC-LH-SMD work? 

 

thank you!

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame
GLC-LH-SMD is supported.
What firmware is the switch stack running on?

WS-C3850-24S-03.06.05E
(cat3k_caa-universalk9.SPA.03.06.05.E.152-2.E5.bin)

 

I see GLC-LH-SMD is compatible on/after XE 3.3.3SE, 16.1.1 XE 3.3.3SE, 16.1.1 at
https://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html#_Toc503260659
I'm guessing this was all I needed to do?

Yes. Should work.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: