3640 12.2(11)T The unit is registered with the primary and secondary CCM, but it does not down load the config from the callmanager. According to the docs I should be able to use the ccm-manager config-download server <ip-address command to specify the TFTP server but this command does not work on my unit. If I try to download from the router or from the CCM it shows up as a failed attempt. Is there a different command on this unit or should I be checking something else?
I ran into this same problem with 12.2(11)T on a 3640 that worked fine with the XN code. I put the Sniffer on it and saw the router was doing a TFTP request for the file, but Call Manager could not find it. This is apparently a bug, but it is such a simple matter to manually configure the MGCP dial peers that I did not bother to open a TAC case. I did search the bug list to no avail. It would be interesting to reload the XN code and see exactly what the difference in file name is but I didn't have the time to mess with it.
hi Team, we are planning to deploy Multi-Factor Authentication for Jabber. The main requirement is to use MFA over internet (MRA).Is it possible to deploy MFA just for MRA and don't touch impact any on-prem existing setup?Can someone please guide on ...
Looking to expand your professional network? Interested in gaining an edge with exclusive technology insights? Engage with Cisco experts, share feedback on products and connect with peers from across the globe. Cisco Champion 2021 applications are open fo...
UCCX does not natively protect HTTP Triggers.
I wanted to come up with a solution to handle HTTP cookie based authentication.
There is a zip file for this project attached to this article. It was written on UCCX 12.5...
CUCM can backup the manually or have sehchduler to backup the configuration and historical reports from the server diester recovery systemStep 1. Navigate to CUCM > Disaster Recovery System > Backup > Manual Backup as shown in the...