01-20-2004 04:53 AM - edited 03-13-2019 03:25 AM
Do you know if it exists a command when an AIM card is on the slot 2 of a 2691 XM and the E1 module is on slot 0.
Does it exist a command to tell the E1 card on slot 0 to use the DSP in slot 2.
Irene
01-20-2004 11:59 PM
Can somebody give me is feed back.
Do I need to indicate to the E1 interface card in slot 0 how to join the AIM-30 in slot 2?
01-21-2004 04:58 AM
It doesn't matter what slot the AIM module is in, the DSP resources will be assigned to the E1 VWIC timeslots.
Make sure you add the commands -
network-clock-participate aim
network-clock-participate wic
network-clock-select 1 e1
This will ensure the AIM and the VWIC are using a common clock reference.
01-21-2004 06:48 AM
thanks
I will give you a feed back as soon as possible
01-23-2004 08:59 AM
Match exactly my need
Thanks
Irene
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide