09-29-2002 05:50 PM - edited 03-12-2019 08:59 PM
Dear All,
we have an AS5300 with 4 E1, with IOs 12.2(XA). But we could not use more than 58 ports of it. Someone know if there is a kind of limit of use in this equip.
Thanks
Samy
09-30-2002 12:09 PM
Samy
You are probably limited by vfc, How many VFC's do you have ? and how many DSP' are on each vfc ?
do
show vfc 1 board
show vfc 2 board
you need 30 dsp's on each board to do 120 calls thats with C549 technology do
show vfc 1 tech
show vfc 2 tech
and determine codec complexity you are using.
Check out this link for an explanation:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120xh/pucc124x.htm
09-30-2002 01:57 PM
Dear Sir,
As you asked had 30 dsp in each VFC as show:
BR_1X2_01#sh vfc 1 board
VFC board state is UP, vfc status VCWARE running(0x4)
VFC board in slot 1 with 30 dsps
BR_1X2_01#sh vfc 2 board
VFC board state is UP, vfc status VCWARE running(0x4)
VFC board in slot 2 with 30 dsps
BR_1X2_01#show vfc 1 tech
Technology in VFC slot 1 is C549
BR_1X2_01#show vfc 2 tech
Technology in VFC slot 2 is C549
and the codec That Iam using is:
voice class codec 1
codec preference 1 g723r63
codec preference 2 g729r8
codec preference 3 g711ulaw
codec preference 4 g711alaw
BR_1X2_01#sh vfc 1 cap
Capability List for VFC in slot 1 and 2 use:
1. cor-vfc-hc-l.3.4.27l.bin
2. bas-vfc-hc-l.3.4.27l.bin
3. fax-vfc-hc-l.3.4.27l.bin
4. cdc-g711-hc-l.3.4.27l.bin
5. cdc-g726-hc-l.3.4.27l.bin
6. cdc-g729-hc-l.3.4.27l.bin
7. cdc-g728-hc-l.3.4.27l.bin
8. cdc-g723.1-hc-l.3.4.27l.bin
I do not see anything wrong... Could be the gAtekeeper ? Iam using a cisco 7200 with IOS:
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-JS-M), Version 12.2(2)XA, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
TAC:Home:SW:IOS:Specials for info
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Tue 26-Jun-01 23:17 by hwcheng
Image text-base: 0x600089C0, data-base: 0x61892000
ROM: System Bootstrap, Version 11.1(13)CA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc
1)
BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 11.1(16)CA, EARLY DEPLOYMENT RE
LEASE SOFTWARE (fc1)
BR_GK uptime is 4 weeks, 4 days, 6 hours, 52 minutes
System returned to ROM by reload at 12:00:32 UTC Thu Aug 29 2002
System restarted at 12:03:09 UTC Thu Aug 29 2002
System image file is "slot0:bootflash"
cisco 7206 (NPE200) processor (revision B) with 114688K/16384K bytes of memory.
Processor board ID 11058156
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
6 slot midplane, Version 1.3
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
8 Ethernet/IEEE 802.3 interface(s)
2 FastEthernet/IEEE 802.3 interface(s)
8 Serial network interface(s)
125K bytes of non-volatile configuration memory.
4096K bytes of packet SRAM memory.
16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
4096K bytes of Flash internal SIMM (Sector size 256K).
I really do not know what could be "blocking" the perfomance of it.
Thanks
Samy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide