B-ACD for CME: lot of noise on audio files and no DTMF working
I'm trying to migrate my telephone system from UC500 to 2900 router.
Everithing is ok apart from AA: when I call from internal number everithing is ok but when I call from a mobile I can hear a lot of noise and DTMFs don't work. I used audio files collected directly from my working UC500.
I configured B-ACD as follow:
application service aa flash0:/B-ACD/app-b-acd-aa-220.127.116.11.tcl paramspace english language en paramspace english index 1 param call-retry-timer 15 paramspace english location flash0:/B-ACD/ param max-time-call-retry 700 param handoff-string aa param voice-mail 18 param welcome-prompt _bacd_welcome.au param service-name queue param aa-pilot 10 ! service queue flash0:/B-ACD/app-b-acd-18.104.22.168.tcl param queue-len 15 param aa-hunt3 13 param aa-hunt4 27 param aa-hunt1 11 param queue-manager-debugs 1 param aa-hunt2 12 param number-of-hunt-grps 4 !
dial-peer voice 10 voip service aa destination-pattern 10 session target ipv4:10.1.2.1 incoming called-number 10 dtmf-relay h245-alphanumeric codec g711ulaw no vad
The 2020 IT Blog Awards, hosted by Cisco, is now open for submissions through October 16. Submit your blog, vlog or podcast today. For more information, including category details, the process, past winners and FAQs, check out: https:...
We have CUCM and CUC (v12.5) which has been directly registered to Cisco's Smart Licensing, but today's I noticed this error from RTMT "Smart Licensing Authorization Renewal Failure". I tried to force the re-authroization and re-registration and now it sa...
Hello I have a Cisco 7841 3pcc Phone, if I specify a custom ringtone and try to play it, it is spit out in the log> Bad parameter in Ring File field: w = tftp: //192.168.220.120/TEST.rawand the standard sound plays.-----------4047 ERR Jan 17 16: 15: 33...