01-08-2003 03:57 AM - edited 03-12-2019 10:10 PM
Hello,
I installed a SRST with a callmanager. Every things work find. Except when in SRST mode (CM fallback) i made a call :
The calling number receved by the other and is the internal number i use for the IP phone.
I call from IP phone n°25
so it goes :
- calling number 25
- called number 0145678912
The call is ok, just the number is not good (it must be 0144556625).
How to configure that in the call-fallback-all ?
Thank's
Solved! Go to Solution.
01-08-2003 04:55 PM
you need to add a translation-rule to convert the 25 to the full number
eg:
Translation-rule 3
rule 0 ^2 014455662
then add the translation rule to your outgoing pots dial peer
eg:
dial-peer voice 3000 pots
translate-outgoing calling 3
hope this helps
01-08-2003 04:55 PM
you need to add a translation-rule to convert the 25 to the full number
eg:
Translation-rule 3
rule 0 ^2 014455662
then add the translation rule to your outgoing pots dial peer
eg:
dial-peer voice 3000 pots
translate-outgoing calling 3
hope this helps
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide