09-30-2002 02:42 AM - edited 03-12-2019 08:59 PM
Hello
i have 2 BABX connected with 2 vic-2e/m (attached to cisco 1760 on both sides)
the 2 routers are connected with BRI (over ISDN°
i have implemented crtp compression and g729 Codec
when i have 2 voip call its ok
but when 3 or 4 voip call the quality is bad !!
what should i add to my configuration
thanks For help
10-01-2002 01:09 PM
I would say at first glance that you are running out of bandwidth.
have you tried implementing LLQ or any other queueing mechanism?
http://www.cisco.com/warp/public/105/cbwfqdialer.html
also check the bandwidth calculator
10-02-2002 04:02 AM
Hello,
As you are using cRTP & G729, your problem should not be the bandwidth. Do you have other traffic than voice on this link? In this case, try to implement LLQ.
Or show us your config...
Jean-Philippe
10-02-2002 04:22 AM
Merci Jean-Philippe
i dont have any other traffic on the link, only voice traffic
can u give me ur email ,then i send you config
thanks for help
10-02-2002 10:15 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide