Barge/CBarge in CUCM 9.X

[agionetworks]

Hello All,

I have 4 nodes CUCM cluster and all node has CUCM service enable and have 16 conferences each. Now when users start using cBarge (every morning they do), after some time it goes maxed out (next person cannot join). Do cBarge uses conference resources..? Can we increase this count 16 to any further without any conflict..? Please help me.

Thanks,

Narendra

[tgaur]

hi,

yes Barge requires a conference bridges or the conference resources, follow :

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsgd-861-cm/fsbarge.html

regards.

[Maren Mahoney]

In addition to the capacity of the conference bridge itself, the cBarge feature is limited by the CallManager service parameters for "Feature - Conference". I can't remember if the limiter is the "Maximum Ad Hoc Conference" parameter, or the "Maximum MeetMe Conference Unicast" parameter. Both are set to 4 by default. Try increasing these numbers to expand the cBarge participants.

Maren