Other Collaboration Subjects

HiI am having intermittent problems with Call Pickup (not group pickup). It seems to be with internal calls only. The problem is not localized to one department or location. What happens is a call comes into one line, a person on the phone in the off...

Hello,I configured SRST in my CallManager. When my CallManager is out of order, my phones are in fallback mode.I can phone in the interior but I can't phone to the exterior.I think that it is a problem of dial-peer in my gateway but I am not sure.Can...

i have a customer who has an analog conference room phone plugged into an FXS port on a 2821. I can make inbound calls to this phone, but i can not get it to dial outbound. Outbound meaning both PSTN calls as well as calls to other phones through t...

From what I understand the Application layer provides the interface for a user to interact with an Application such as e-mail, and FTP, and that the Presentation layer is reaponsible for how data is represented to the user through that interface (lik...

Hello,I have setup a terminal/comm server to catch ascii characters from a serial lineI make the configuration of the router as described on http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtmlBut every ...

I have 1 Publisher and 1 Subscriber. My remote branch has 2 voice gateways for redundancy. In order to prevent MOH tranverses across the WAN, I implement Multicast MOH on the 2 voice gateways. After I set 139.1.1.1 with IP increment method on publish...

I have an ICT non-gk between NY and chicago. I am running CCM4.1.3. When two on-net users are on a call in chicago, and they try to conference in a user in NY, by dialing a 4 digit extension. The user in NY get the error "Cannot complete call" on the...

Trying to connect a 2821 to a PBX system (T1) card.Cisco 28211. VWIC-2MFT-T1 card for 2 connections to the PBX2. 2 - WIC-1DSU-T1-V2 for connection to the ISP3. PVDM2-16 - DSP Module4. PVDm2-32 - DSP ModuleI believe I have a configuration problem with...

I am installing AA applcation for CCM 3.3. When I try to login for the AA admin page for the forst time, I cannot get in to the system. Windows admin password seems to be not valid here. Is there any special password for the forst time login ?

HiEasy question of the day - if I use the CCMUser pages, I can set up speed dials that appear on buttons... no problem.If I set up speed dials that aren't button-associated, how do I dial these from the phone? I was under the impression they'd appear...

I setup Multicast MOH on the Lan with a Multicast source, server and group. The music works locally but not across the wan. I setup IP Pim Sparse-Dense-Mode on all interfaces on both routers (Local and Remote) and I setup ip Multicast Routing on both...

My customer has upgraded their local PRI from 12 channels to the full PRI. It's coming into a 2821 VWIC (PVDM2-48 on board) & is running CME/CUE. Seemingly simple question: Can I take the T1 controller config from "pri-group timeslots 1-12,24" to "...

HII am trying to find user guides for the 7912G phone in French and Dutch. Does anyone have a PDF or link they could send me?regardscolin

I have just installed cisco callmanager 3.3(3) in our office. All is working except one thing. When we receive an incoming call say from 07730506229, the number presented on the phone is missing the leading 0, so we see 7730506229.I want to be able t...