Other Collaboration Subjects

Will IP Phone 7936 supports softkey "pickup". From doc, it says "yes". But I cannot configure it thr. nor found this key on the IPhone. I am using CCM 4.1Pls help, thanks

We have our 'Tone on Hold Setting' in CCM 3.3(4) set to Zero seconds. For internal calls between IP phones there is one set of on-hold beeps when call is placed on hold. Calls that come in over PSTN on IOS H.323 gateways (on 7200 routers) - get tone ...

I have a sysem where the second call into the AC rings only for a couple of seconds and then goes to voice mail.I have another client where I can set the ring duration on the DN. Both have the same version on CCM.I suspect that there is a service par...

Hello,When a first incoming call rings and I take it, I can transfer it to another extension. However when a second call arrives before the 1rst call is transfered, the phone highlight this new call automatically and the only available option is to a...

Anyone can tell me the current limit for the number of controlled device (CTI port and RP, phone, etc..) for single application provider (in other word for each Jtapi user) ? I know the total limit for single CM or cluster CM but the number I'm reque...

I am on Call Manager 3.3.4 and BARS 4.0.2 and periodically when I check the BARS backup logs the scheduler looks like it will start, but it will only erase the old log file and then the backup will not run. In the past I have gone in and just re-ena...

Hello,I´m having a CCM3.3.4 with several Hardphones and IP Communicator running.The problem is only with the IP-Communicators.During outbound Calls after a few minutes the caller on the IP-Comm couldn´t be heard on the PSTN-Site for several seconds a...

Hi All,Can anyone give me an appreciative max number of calls that can be sent through 3640 router?Our 3640, connected to Avaya via E1 (only one E1), jumps up to 45-50% CPU util when we send 17 calls using GSMFR codec.Voice card is configured with co...

We have Call Manager 3.3(2) and a MGCP gateway with one PRI to PSTN and other PRI connecting to a PBX using Q.Sig. The problem is when a PBX phone places a call to an international mobile number, the PSTN takes a lot of time to process the call and a...

All,I have configured MGCP in Call manager with 3745 voice gateway and added attendant DN as my own DN. everything seems to be working fine, incoming calls are directly ringing on my phone only and outgoing calls are working fine. Issue :if somebody ...

Hey all,Has anyone that's got their CCM integrated with AD succsfully edited the directory.asp in /ccmuser to display more attributes in the search resulte.gMobile phoneHome phoneor other variable from Active Directory for that matter!?any help grate...

Can I change user passwords in Callmanager if I use AD integration? Or do I have to change it in AD everytime I change passwords for users?

I just installed 1.1.4 and I can't get to the admin web page because the two CER services won't start. No errros on logs, install went clean and when I try to start ceradminserver i get a windoes internal error. Am I missing something in install'

Hi,Currently I have backup utility 3.5.53 installed on a server. When I run the backup it will create mcs.sti file but it dont create the DBNAME.INI and BACKUP.INI.What Cisco says that these files are automatically created by backup utility 3.5.53 an...

I have a peculiar requirement. Using CCM 4.0.I am forwarding calls from some extensions to others( Like x to x1, y to y1 etc). This is done because some extensions are changed. The call flow is like this....Call comes from gateway, lands on IVR, cal...