Hi,Having a strange issue where 7936s reboot if they have shared line appearances with a 7960. Have tried several different phoneload versions for 7936 upto the current release and same problems. Anyone ever see this or have any ideas?
I am trying to install Personal Assistant 1.4(2). I get the message "Connected successfully using the information supplied, but could not find a Call Manager database on the server. Please check the information and retry," exit the installation progr...
I have a 2651XM-V router with an E1 interface. When the router restarts, the E1 doesn't come up on it's on.I can't make calls from internal extensions. I have to place a call from the PSTN to an inside number first. That brings the E1 up and I can pl...
Hello,I have a customer that has primarily 7912 phones. Apparently most users don't know about the corporate directory because it is burried in option 5 of the four line screen. It sounds like mainly a user training issue, but my customer wanted to k...
Hi.Got CCM Version 4.0(1)sr2a and using AC 1.31. The Attendant Console cost a lot of performance, it slows down all Computers using AC, why?2. When there is an incoming call the AC shows a lot of double entries. AC users having shared lines on there ...
Port 0/11 attached one ip phone and no pc behind the phone. Show mls qos inter fas 0/11 sta shows there are packetd classifed as dscp0, by doing math I found the packets classfied as dscp0 is from dscp26:1690-1618. DSCP26 is sccp for sure, but why so...
Hi, I have Attendant console installation. At first everything was OK but after some time the application window started to POP UP with every incoming or outging call on some of the computers. Does anyone know how to turn off this behavior?
The IP Communication section has been very helpful. I'm able to see how many calls are going through our voice gateways via a browser. Life if good :)Since I missed so much is there any way to query a voice gateway (it's a 1760) or maybe the call man...
Working on hardening our setup and would like to know if others have tried this. I understand that the Settings selection can be disabled on the IP phone through CM, but I don't want an "all or nothing" approach. With the 7970 the end users want to...
AS5350 Version 12.3(11)T2I want to Transfer Calls From ISDN to CCM ,The transfer call from PSTN to CCM doesn't work.When I try I have a busy line.I try this command on interface Serial3/0:15 "isdn incoming-voice Voice", but "voice" done % Invalid inp...
i'd like to find out how hard it would be to displaythe call duration on the IP Phone screen after the call is finished.it could just a) stay on the screen b) program a soft key to display the last call duratiion. or c) add that field to the Directo...
Hi,I have some questions about IP Phones and RTP Streaming technology.I want to implement an 'alarm system software' which create a sound file from an alert message and send a RTPRx SoftKey to a set of phone. So, what do i need ? - a RTP Server ?- a...
Hi !I tryig to upgrade SCCP software on my new 7960 Cisco Ip phone from default (App Load ID P003AM30,Boot Load ID PC030300). I using procedure ,described at http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/addprot/mgcp/...
Looking to try and configure CallManager so can use one username and password for pushing PhoneExecute to any phone. The authentication requires that the username and password credentials passed to be associated with the receiving device. Is there a ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
