Other Collaboration Subjects

In callmanager is there a hard limit to the number of devices I can associate with a user? I'm using Active Directory integration.I can't associate any more than around 1760 devices with a single user. Should there be any reason for this?

What is the best way to impliment QOS over VPN links for IP Phone to CCM communications? ais there anyway to mark traffic before the VPN tunnel? anyway to mark it for or in the VPN tunnel?

Hi.I know I can have a VWIC-2MFT-T1 card on the NM-HD-2VE. My question is can I have a T1 port just for Data within the NM-HD-2VE? or it will only support voice configurations? I know the HDV2 can accept Data and Voice Connections as well.TIA,-Jose

I have 2 voice gateways. one 3745 connect with PBX using E1 qsig. and another one 2691 connect to PSTN using 2 port FXO? I am using CM version 4.0(1)when there is a call to FXO , the router receive call , the auto attendant IVR app.is activated and ...

Anyone know if Callmanager 4.0(2a) will get ANI settings for a MGCP FXO device? I don't see any way to do inbound caller id currently without switching to H323.Perhaps I am missing a MGCP setting?

I have the need to do paging through a Call Manager 4.0 installation that has a WAN as its major connection piece. I am looking at Berbee and Net6(if they ever get back to me) as possible solution, but there may be bandwidth issues in the WAN that w...

we are trying to connect CallManager 4.0 via Cisco 3745 to Avaya PBX.we are worrying about call path following situation;phona A in CallManager communicates to phone B in Avaya.phone A transfer a call to phone C in Avaya.In that situation, RTP is pas...

I've made a small java application for a ringtone replacement on IP Phone.It simply sends an RTP stream with melody to the IP Phone, when someone is calling on it. And the Phone is ordered to receive it using RTPRx:xxx.It works just fine, but there i...

Hi,In a hosted CCM solution we will need to convert public IP addresses to private through NAT.Will that affect how CCM works with regards to for example JTAPI or other protocols?Regards,Henrik S PedersenTDC

HI..trying to simulate a simple analog pstn with 3810 acting as my pstn switchanalog phone--3810(fxs1/6)------(fxo0/0)MRP200(GW)--ccm3.3.4--7960ipphoneIncoming call > analog calls 7940 and 7940 rings once and disconnectsOutgoing call > 7940 calls ana...

We have cm 3.3(3) and I have on order a 7970 phone to begin testing. I wanted to work with a background image and have it ready... Reading some documentation on line, it says Step 2 Place the new PNG files that you created in the following folder on...

Hi,We have CCM 4.0 .we planning to integrate this with PSTN using H323 gateway(Cisco).we have been given a range of DID numbers.For one group of ext 4XXX,the caller id going through the gateway(GW1) should be 51316XXX.ie if the ext number is 4002 & ...

I am researching issues surrounding supporting two separate clients from a single CallManager cluster. I am aware of the capabilities of CallManager wrt separating Calling Search Spaces and Partitions and associated call control functions.I would rat...

Is there anyway in CCM where say a customer has 800 DID numbers and all the 800 numbers are not used right now, so as an example someone calls 8580 which is sent down the PRI but since it is not assigned in CCM, CCM will play a busy tone, now the cus...