Other Collaboration Subjects

We have installed Cisco Unity 2.4.6.1 (CallManager 3.1.3(c)) with french language. When pressing the messages button, the openning greeting is in french. But, when dialing the Voice Mailing DN (like 4377), the openning greeting is in english.Is there...

I want to be sure before to do an offer for an IPCC customer that has already an mcs 7835 working. It wants a secondary MCS and the question is:can I offer an MCS 7825-1133? There are any technical problems or there is only the obvious different "pow...

I would need to change codec G711u-law to G711a-law for ip phone communications. Where can i change it?Thanks, Martin

There is static noise on the IP Phones only on a remote site.Remote Site gateway is a 2620.CCM is 3.1(3a)-SPF.Could it be a problem with the gateway.ThanksAnupama

Hi,The set up consists of CCM with Netmeeting clients. Is it possible to integrate the DC directory of CCM with the netmeeting clients ?? Else any alternatives?Thanks & Regards,Ntk

MWI works as advertised without logging in to Extension Mobility. I am, however, not able to get MWI to work for the logged-ni users. Are there any issues or configuration changes required for logged-in users?CM 3.2.3c SPBSP2Unity 3.1.4SP2ADExchang...

Hi,any idea how to do that?When somebody external calls I want to play a custom text before the switchboard answers.I was thinking of achieving that with AutoAttendant but I don't want to have a menu.Alex

Hi there!For a voice migration project, we plan to put a 2651 in between the provider and the old PBX. For that we use a HDV Module with a dual E1 PRI card. Actually, I set up the lab with ccm3.1 and the 2651. The provider an d the PBX is simulated b...

Hi all,I'm facing an issue with a C3620, connected with MGCP to a CCM 3.2(2c).H323 works fine, and calls go both ways to and from the CCM and the PRI.If I configure the controller and the serial interface to handle MGCP Backhaul, my PRI get immediate...

When someone calls into Unity, they are unable to dial an extension. You hear a message "Sorry, I did not recognize that as a valid entry." Search by name works, and all the call handlers work. It is a Unity 3.1(3) server.Thanks.

Is there a way in Unity to transfer a call right to someone's mailbox without ringing the phone - in Meridian Mail this is called "Express Messaging." We have a situation where someone forwards their phone to someone else and when the caller wants t...

I have a question about Fax transmission over IP networks. If I configure as the following, what will be the FoIP packet size? I mean, what will be the compressed fax_data packet size?Let the default codec is g729a (8Kbps>>12Kbps in real). And the fa...

My cluster ccm is member servers in a domain. Is there any risk that cluster ccm quit domain and join in workgroup?I am concerning SQL name.

I wish to derive Network end ISDN from the CallManager infrastructure which will have muliple 6608 cards connected to the PSTN.Does anyone know of a way of doing this

I have a Mediatrix talking H.323 to Cisco 7960 via Cisco Call Manager v3.2.1. Cisco 7960 can establish a voice call with Mediatrix as long as Cisco initiates the call. When Mediatrix initiates the call, Cisco reject the H.225 call setup with the fo...