Other Collaboration Subjects

Currently we have a dedicated inbound DID number going to UNity for the Automated attendent. We had an issue today when dialing inbound into the main number it would busy out. Same result for other DID's, they would ring then busy out when Unity kic...

I had two problems in SRST:1. 7910 phone didn't see any fallback message.2. 7960 can make outgoing call.INcoming and internal call is fine. GW is 3660 with pRI , I only configured this two command to enable SRST: call-manager-call back and ip s...

Customer would like to block 1010xxx, can I use route filter(which entry) or I only can use specific route patter like 91010... to block it?

My coutomer's PSTN support both 7 and 10 local digits call now. They only will want to block 611 and 411 service, everything else is permitted. Do I need apply 7 digit filter in order to make 7 digit local ?

Hello, I have a confusion about this card VWIC-1MFT-G703 , as I know this is not supported by NM-HDV, so does it support packet voice ?, the other question is, where are the DSP it's need to process the calls ?Can you provide me some more det...

I am setting a as5300 with one excel switch, and this isn't working.I saw : 23:17:00: ISDN Se3:23: RM returned call_type 1 resource type 0 response 223:17:00: ISDN Se3:23: INCOMING CALL: VOICE ERROR: Requested circuit/channel not available(0x2C): bch...

I have cisco call manager and i want to know, How assign authorizations codes to make calls by ip phone ? I have 7910 , 7940 and 7960 ip phone models.

I am facing a strange problem, whenever the Modem for the Channelised E1 is switched off and back on, all outgoing calls from the CCM stop for a unspecified amount of time it could last from 5mins to 2hrs, after this everything goes back to normal. B...

Hi,Currently, I'm in the process of designing video over ip system. I'm interested in 3510 IP/VC product. But one of my concern is the trancoder issue. I noticed that the codec supported by 3510 is only g711alaw/g711ulaw. What if, if other participan...

I get a strange output from the 1750 with ios 12.1(5)T8 as follow:VOIP:ConnectionId[0xA5BCD5C2 0xBABA01DF 0x0 0x9EF43E8]IncomingConnectionId[0xA5BCD5C2 0xBABA01DF 0x0 0x9EF43E8]RemoteIPAddress=10.254.255.6RemoteUDPPort=0 <------------------Why this p...

Is there a way to create a "Party Line" in Call Manager. So if I create a shared extension on several phones, all phones can pick it up and have an "auto-conference" type thing?

Team,Need help! I have a client who is using a 2621 (IOS 12.2.28T5) with NM-HDA and 12 FXS ports.There are 9 FAX machines caonnected to these FXS ports.We are using MGCP with mgcp modempassthrough cisco command for FAXs.We are using CCM3.2.2c with s...

I Originally set up Unity 3.14 with Exchange 2000 off box and everyhting was working pretty well. When I came back to the customer today, I found out they had moved everyone's mailbox to a new Exchange server, and they plan to decomission the origin...

Currently we have a dedicated inbound DID number going to UNity for the Automated attendent. We had an issue today when dialing inbound into the main number it would busy out. Same result for other DID's, they would ring then busy out when Unity kic...

Anyone know when 12.2(11)T w/ Echo Suppressors is coming Out? OR something better?