Other Collaboration Subjects

I have a 2811 router running CCME/CUE along with another 2821 router that has a PRI circuit. I have my phones registered to the CCME and I can make calls between them but I am new to this and I was hoping someone would know of some examples of how to...

I have cisco callmanger 3.3when users dial the access 499 for paging it jsut rings does not page overhead. Where can I check?

Does anyone know how to retrieve the IP Phone's model information from the ASP service page?

Hello,I have DN's with Dual-line like this:ephone-dn 10 dual-line number 6001 label 6001 allow watch call-forward busy 6099 call-forward noan 6099 timeout 10When Line 1 is busy, how can I configure the DN, that a second incoming call get "busy" ?Th...

Hi Forum;I used the following DMA link to obtain the tool:http://cco/cgi-bin/tablebuild.pl/cmva-3desAnd it did not open, anyone can help from where I can download it?RegardsBilal

Hi All;We are running CCM version 4.1(3) which is microsoft windows platform and we are going to use CCM version 6.0 which is linux based, what can we do to transfer the configuration on 4.1(3) to 6.0 where both OS are different?Also, is there an upg...

HI,We have Call manager 5.1 with publisher and Subscriber,We were trying to configure IPMA service with proxy line, we have configured7941 as Manager IP Phone , and 7961 as Assistant IP Phone . we have created Phone Service in Phone Services with Cal...

Hi, Here is the scenario. A single site IPT where gw is using h323. If I have "no h225 timeout keepalive" configured in h323 gw, an acive call is established between pstn and ip phone, if ccm fails, will the call still preserved? thanks

I'm looking for a matrix that will tell me how many phones a server model is able to handle under CallManager 4.2(3) and 5.1(2). I can't seem to find one, can someone point me in the right direction?-Shikamaru

In my research, I was unable to find line privacy supported in CME/500, but I did find it supported in Call Manager. Does anyone know if this can be done in CME/UC500?

I have a request for a light mounted on the outside of an office to indicate when the person is on the phone. We are currently running UCM 5.1.1 and using a 7960 phone.Any ideas? Thanks,Bob

We are having a problem with users reporting slowness when they are connecting their PC's through their phones. The phones in use are 7912's 7940's and 7960's. The network layout is two 3560G PoE switches with the data and voice network separated by ...

Hi All, I am using CME 4.1 with PRI connection. all ephone-dn are dual line with secondary number. I can't define dialplan-pattern becasue DID with extension is not match. ephone-dn 1 dual-line number 337 secondary 9495025006 when I make a outbound c...

Migrated CCM from 3.3.5 to 4.2.3. New servers and fresh install. Phones/gateways didn't change (much).After phones go through upgrade and home to new ccm 4.2.3 server, now ALL phones display "Logged out of Hunt Group", even if they aren't in hunt g...