Other Collaboration Subjects

CUCM System version: 11.5.1.14900-11   Hello, We received our AT&T bill and there's $2,400 international off-net charge.  I'm trying to figure out who made the call.  The number listed on the bill is 775-900-0000, which has a Nevada area code, we are...

Hi All   I have a Cisco IP Phone 7940 who has the extension with X marking on it. Earlier the phone was registered with Asterisk Server and even after factory resetting the phone, the phone still came up with the previous configured extension along w...

I have a Expressways pair to B2B calls with 5 RMS licenses, so my doubt is, Do I need this licenses to call to web-ex?

Is there a firmware download available for a Cisco LCD 110L Pro 47?  I have a unit that is displaying an error code on boot-up.  SW:3.20  No menus are available. Only choice is to unplug.  I am hoping that a firmware update will rectify. Thanks

I understand from 'Webex Edge Connect' requirement documentation that customer should have a AS number to build BGP peering with Cisco edge routers. If a company doesn't have public AS #, is there any work around?   Thanks

Recently we are having Fax issues saying the poor line connection error for a single site only. Please help me out with the issue. ServiceProvider --> SIP server--> VG MGCP ---> FAX  Attached Configuration for VG

Hello All I'm facing an issue with cisco media sense, I'm able to open the URL of cisco media sense, even if I chose the option cisco MediaSense it works fine, But If I chose the option cisco mediasense search and play after it open the page a messag...

Hi all,   we're going to use ISR 4331 with IOS isr4300-universalk9.03.16.07b.S.155-3.S7b-ext.SPA.bin with NIM-2BRI-NT/TE card. We get following specification from provider:BRI type: T0 line isdn switch type: VN3 point-to-point Will it work? According...

Hello All I am using IronPort in front of exchange but recently facing a problem as my user don't get delivery/read receipt. Is there any way that i can configure IronPort (which is my mail gateway) provide the user the delivery/read receipt. I like ...

We have a couple of the new Cisco Webex Share devices. We are trying to set them up, when we select the WebexShare network and enter the passphrase it thinks about connecting then doesnt. It just then goes in a loop where we try to connect then it sa...

Hi all,   We are using Expessway x8.10. Telco told me that one DN from my company has been hacked. After checked the CDR and the log, i found the source IP is from external and the hacker is from Expressway. Now i blocked the IP from FW. Is there any...

How is everyone handling 911 with the room devices?  If you have room devices with Touch10 and allow outbound calls, are you worried about 911?  Just wondering how other engineers are handling EnvironmentRoom devices with DID'sSIP TrunksCloud registr...

Hi guys. Recently I had a Problem when trying to configure a VWIC card NIM-1CE1T1-PRI and because I managed to do so I want to share it with you. I have a Router which has a 4th generation card in Slot 0/1/0 where I was able to configure the Controll...