Other Collaboration Subjects

HiI've installed the IPPhoneForward app from myvoipsource.org on my CM. It doesn't work, so I've been testing my AXL...I believe I should be able to browse to:http://10.52.234.240/CCMApi/AXL/V1/soapisapi.dllThen enter the Windows administrator/passwo...

Hi,I just connected a 2800 series with IOS 12.3T11 to an Avaya PBX using BRI.I noticed that the Avaya sends caller NAME information. Not only the calling number but also the calling name. Cisco Phones display both, calling name and number when a call...

I use Call manager 4.1 and Cisco IP phones 7912,7940 and 7960.Sometimes users reports to me that their ring tone that are select in your phone change.Can anybody say to me why?.Thanks, Carlos.

The DPA config document gives an example of 12 call processing ports and 4 MWI ports from an Octel system. It also states that this configuration is flexible - eg: you could increase the ratio: 6 MWI and 10 call processing ports. What the doc does no...

After fresh installation:OS patch: win-OS-Upgrade-K9.2000-4-2sr2.exeCM patch: ciscocm.4-1-3-sr2.exeI have installed extended services (auto attendant)3.5.3 with patch cm-es.3-5-3-sr2.exe. When I access Administrative page to setup Directory LDAP acce...

Hi,I have a cluster of CCM 4.0(1). of 2 subscriber and 1 publisher. Now I want to upgrade it to 4.0(2a). Can anyone suggest the Preupgrade, postupgrade tasks. What are the components required for doing the upgrade.Thanks in advance.

Hi. I already have a CME site up and running using a T1 E&M-WINK to access the PSTN. All the DNs are in the range of 1400-1499. There are H323 connections to other sites (i.e. not running cme at the moment) around 30 sites with legacy PBX connected ...

Hi!I`ve a litte question to CCM 4.1(3)! I have about 300 phones with DNs starting form 8000. Everything is working fine but i want some DNs to send a different Number to external parties!For example:User A: DN 8100 should appear outside as 1000 (09xx...

After adding a user, we can associate an extension mobility profile to that user. What does it do when associating two or more extension mobility profiles to a single user? How do the users know which EM profiles they are using? Thanks.http://www.cis...

We are running CCM v4.1(3) publisher on HP DL380 server and would like to setup a testing environment with Dell PowerEdge 1850. We have plenty of spare 1850 servers.1. Did anyone try to install CCM in a Dell 1850? Any idea if Dell 1850 can support CC...

Does extension mobility supported in Cisco 7930 conferance station ?(I casnnot see the services buton in this phone, so can we reconfigure the keys to enabling extension mobility ?)

Hi I was wondering if anyone knows if it's possible to change network configuration remotely on the 7912G ip phones. We do not use DHCP for our remote offices. I just wanted to add the backup tftp server ip address remotely.

Hi,I have a CME Router with a 2 Port FXO. The Branch will be limited to the 2 lines. I want to enable fax detection so when a fax is detected it is forwarded to an internal extension which will be an ATA with a physical fax. The IVR is working fine. ...