hi all, We are facing voice quality problem in cisco as5400 when a call is originating from IP and terminating to PSTN and also the other way round. However in PSTN to PSTN the voice quality is good. Pls have a look the attached configuration fi...
I have problem to tranfers incoming calls that is receive on ip phone on asistance desk, when she pick a incoming call and try to transfer the call is droped, but it's OK to transfer on out goin calls.We use CCM4.1.2 and use the range 1XXX for interc...
HiI turn on auto-registration on only one CM in my cluster but there is 2 devise pool - one for Main site and another for remote site. How do I specify which DP for auto-registration to use for the respective sites?These DP will be only for internal,...
which features (Call Hold, Call Transfer, Call Pickup, Group Pickup)is supported by Cisco CallManager version 4.1(3) when using analog phone is attached to VIC-2FXS inserted into NM-2V module of Router 2620XM. This router is running H.323 and was con...
I have a central CME running on a 3745 with an FXO port connected to the PSTN. I have a 1712 connected to the 3745 via VPN (I have also attemped this with a pix 501). There are 3 7970's at HQ and a 7960 at the remote location. The HQ phones can cal...
Hi,Do you know if outlook dialing is supported from Cisco? If I install the CCM TSP on the Citrix server then I guess i can only associate this with one device.
In order to assign the same extensions on Cisco IP Phones, the requirement is that 2nd DN with the same Extension must be in a different partition. This is the not the ideal setup, but that is what our customer wants. My question is:Can the Cisco B...
I have 3 different CM experiencing the same issue - CM version 4.0(2a)sr2a and 4.1(sr2) and 4.1.3sr1Phones are 7912, 7940/60 and 7971the transfer softkey says "NOT ACTIVE" when the user tries to use the softkey. I read about deleting the phone and re...
Hi,Can we configure Time Of Day Routing for CME. Like from 8am-5pm Calls will ring the phones and after 5pm it will directly go to the voice mail.Will appreciate any help on this.Thanks,Jay
call answered on one phone, when it is transfered to another extension, the phone that its being transfered to will show on the display the transfer , but will not ring. check volume setting on phone and reset the phone.
How do you disable the 'beep beep' from Call Manager when a user puts you on hold. I was told there is something you can disable in either CM or the database. We are running CCM 4.1.2 SR1
Hi,I'm trying to push a URL to a phone, I'm using HTML form for that, and I'm sure it works. The only problem is that the phone doesn't accept the username and password I use and returns error 4. I'm using 7960 with CCM 4.0. Is there some special way...
Hi, I have analog phones connected to an ATA 186. My client needs to have monitored the status of this phones. They have the IP Telephony Monitor and as the ATA doesn´t have SNMP support I can´t receive any trap from them. But is there any way to hav...
