cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
500
Views
5
Helpful
1
Replies

Call pickup from analog phone connected to ATA devices

chrielle
Level 1
Level 1

Is there some key stroke(s) (or whatever) one could enter on a analog phone connected to an ATA18? which has been assigned an IP number such as 3101 and that number 3101 is in the same call pickup group as a group of IP phones in order for that analog phone to pickup a call coming in on one of the IP phones (i.e. in the same call pickup group)?

1 Reply 1

jasyoung
Level 7
Level 7

Check here for the procedure to execute Call Pickup and Group Call Pickup from an analog phone on an ATA-186 or ATA-188. It's basically **3 and then a hookflash.

http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administration_guide_chapter09186a008014c63c.html#25675

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: