06-11-2004 05:09 AM - edited 03-15-2019 02:56 AM
I had previously posted the following post and received the below answer. My question now is whether this can be changed while the ICS is active, or would if require intense reprogramming.
>Does anyone know if /when the MRP with FXO's will support caller ID running
>MGCP ..
MRP uses CCM as MGCP call agent and CCM doesn't support this for FXO.
Probably CCM folks would know if there is a plan to add this.
Solved! Go to Solution.
06-12-2004 07:27 AM
The standard VIC-2FXO has no capability set for caller ID. This is regardless of MGCP or H.323.
The VIC-2FXO-M1 or the MRP3-8FXO-M1 is the module needed for caller ID. (battery reversal)
Reference:
ICS 7750 MRP Software and Hardware Feature and IOS Version Compatibility
http://www.cisco.com/en/US/products/hw/voiceapp/ps967/products_tech_note09186a008015e1c7.shtml
Dan
06-12-2004 07:27 AM
The standard VIC-2FXO has no capability set for caller ID. This is regardless of MGCP or H.323.
The VIC-2FXO-M1 or the MRP3-8FXO-M1 is the module needed for caller ID. (battery reversal)
Reference:
ICS 7750 MRP Software and Hardware Feature and IOS Version Compatibility
http://www.cisco.com/en/US/products/hw/voiceapp/ps967/products_tech_note09186a008015e1c7.shtml
Dan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide