03-28-2006 09:34 PM - edited 03-13-2019 12:42 PM
Has anyone successfully deployed RightFax in this scenario? I have one voice gateway connected to the PSTN via a PRI, and another (non-PSTN) PRI to the Cisco Fax server's brooktrout card. Voice and fax both have their DID ranges. I want fax call to come in via PSTN, and be routed out the other PRI interface to the RightFax server. I understand you can do it with H.323, but has anyone done this with MGCP? I guess this would be considered hairpin-ing a call on the MGCP gateway.
Solved! Go to Solution.
03-29-2006 12:26 AM
hi,
i have similar senario for one of mu customer.you configure the PRI connected to Fax server as MGCP.If you have reserved the DN for fax server then create route pattern for all the number matching the DN and associate the gateway to this new PRI.with this the call will come in via PSTN gw --- ccm --- ( outgoing call)--- Fax server PRI.No need for any configuration on ccm.
03-29-2006 12:26 AM
hi,
i have similar senario for one of mu customer.you configure the PRI connected to Fax server as MGCP.If you have reserved the DN for fax server then create route pattern for all the number matching the DN and associate the gateway to this new PRI.with this the call will come in via PSTN gw --- ccm --- ( outgoing call)--- Fax server PRI.No need for any configuration on ccm.
03-29-2006 08:50 PM
Thanks. I thought it would work. Just feel more comfortable knowing that someone has already done it.
04-28-2006 01:13 AM
Hello,
My topology is:
[ FaxServer with H323 stack (T38) ] ------- [CCM]
|
[MGCP GW] ------------------------------------+
|
|
PSTN
I'd like send/receive fax through MGCP gateway.
My mgcp configuration is:
mgcp
mgcp call-agent IPCCMSC2 2427 service-type mgcp version 0.1
mgcp rtp unreachable timeout 1000 action notify
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
no mgcp fax t38 ecm
mgcp fax t38 gateway force
mgcp rtp payload-type g726r16 static
!
mgcp profile default
but I can't send/receive fax. Is it possible?
Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: