09-19-2011 03:37 AM - edited 03-15-2019 05:19 AM
Hi i have an issue with installation of DMM on MCS7835H2-DMM51K9 and i have Digital Media Mgr Base V5.1 Perptl SW Lic. As normal i tried to switch on for installation but its showing me that its trying to bood from network searching for DHCP . i resterted and pressed f12 and given disk 0 as primary boot device but still the same . Can any one help me out whats the solution for that. Or do i try with a DVD installation.. for that there is no DMM softare i got it with the order. In cisco site i only found the upgrades in software download
09-19-2011 08:52 PM
Sounds like you got the server with no software installed. If you ordered the NFR, this is apparently normal as I just went through the same thing. You will need to request the demo software that doesn't ship with everything else for some reason.
If this is not a demo system, then my guess is either you ordered the wrong part number (ending with a "=" meaning spare) or you have a disk failure. Regardless, a call to TAC should clear this up.
09-27-2011 07:11 PM
I have the same issue, trying to perform initial setup on Cisco UCS C210 M2 server for DMM, but does not boot DMM 'First of Boot Start', tries to boot from network and fails to find bootable media.
I have a DMM 5.2.3 Upgrade CD, included with licensing details, but which does not boot either.
Did you find a fix for this ?? Did you need to order software ?
09-29-2011 05:06 PM
Hi,
Please see below link to find details which HW support fresh install of
5.2.x software and which needs an upgrade path. Upgrade CD / DVD are not
bootable and if you are trying to install it as a fresh install on Supported
HW please request this software via TAC. Thanks.
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dms/rele
ase/notes/dms52rn.html#wp238240
Ahsan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide