CCM 4.1(2) interoperability with Cisco 2821 MGCP gateway

[etmarcof]

Hi,

I have an Cisco 2821 (IOS 12.3(8r)T7) router with following interfaces:

Module 0:

subslot 0:VWIC-2MFT-E1

subslot 1:vic2-2BRI-NT/TE

subslot 2:vic2-2BRI-NT/TE

subslot 3 vic2 -2 E/M

When i add this gateway (2821) to CCM 4.1(2) as MGCP gateway in subslot's box i don't have the choice of vic2-2BRI-NT/TE.

Does anyone know if this cards aren't supported?

Best Regards

MC

[#2]

The voice compatibility document will help you in finding this information:

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml

[etmarcof]

Hi rrjoas45,

I think you didn't understand me.

I want to know why BRI interfaces in gateway 2821 using MGCP protocol didn't appear in CallManager GUI.

In 2821 CLI they appear and are working.

Regards.

MC

[msolak]

Hi,

the 28xx ISR Series supports only: T1 CAS, T1 PRI, E1 , FXS , FXO with MGCP.

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_1/sys_ad/4_1_2/ccmsys/a08gw.htm

greetings

Mehmet

[etmarcof]

Can i configure 2821 as H323 gateway, in spite of call manager 4.1(2) system guide says that 2821 it only support MGCP?

BR.

MC