03-13-2004 09:20 AM - edited 03-13-2019 04:15 AM
I use a client H323 Netmeeting to establish a communication since Internet.
The client H323 has a dynamic address IP.
the first time that the customer is recorded in the CCM, it functions correctly.
If I change address IP of the client it is impossible to communicate.
I see that the old address IP of the client is always registered in the CCM.
How to configure the CCM so that address IP of the H323 client can be modified with each registration ?
Thank you
03-18-2004 11:10 AM
Check if you have enabled DHCP. If so, disable it and also make sure that you reset the client device for the changes to take effect.
03-18-2004 01:39 PM
H323 devices are not registered to the callmanager; meaning that there is no keep alives to them and callmanager doesn't control them. What callmanager does is, if there is a called number for a DN in H323 client, CM is just going to extend H225 messages to the client to setup the call. For some reason if the IP Address is changed CM doesn't have a way to know about it.
03-23-2004 07:35 AM
To solve my problem I installed a gatekeeper
Thank you for your help
laurent
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide