We are running CCM v4.1(3) publisher on HP DL380 server and would like to setup a testing environment with Dell PowerEdge 1850. We have plenty of spare 1850 servers.
1. Did anyone try to install CCM in a Dell 1850? Any idea if Dell 1850 can support CCM v4.1(3) technically NOT OFFICALLY?
2. Planning to use BARS to backup the current config on CCM v4.1(3) and restore it on Dell. Additional CCM v4.1(3) software license has been otained. What else needs to be backup from current CCM in order to make the testing server running the same config as current production CCM?
SIP is easier to make redundant. If there is more than one physical cable to the provider, then SIP can be reserved in three ways at L2, it's the Portchannel, STP and the Fex link, the same as RTG from Juniper. CUBE routers can also be reserved for ...
b+s brings Lightning to the forefront of the Salesforce Experience this summer by adding the ability to route and report on Salesforce Omni-Channel interactions.
b+s continues a product strategy of providing access to the full suite of native Sales...
11. September 2018 | Happy Landings | Frankfurt DE
Chatten Sie schon oder telefonieren Sie noch? Die digitale Kundenreise bringt den Chat-Kanal mit künstlicher Intelligenz in eine prominente Position. Nehmen Sie teil am Flug durch die Möglichkeiten des...
Collaboration Product and architecture introduction-CUCM Part(7/30)
A system has a 2 way divisible room with two SX80s. When the rooms are combined, only one codec will be used. User does not want a notification message displayed on the secondary Touch10.
Is there a method to lockout control of a Touch10 to pre...