02-27-2004 03:39 AM - edited 03-13-2019 04:01 AM
I am getting the following error event in the application log:-
Error: kCTFTPConnectSendFileNonTimeoutError - NonTimeout error
during call to recvfrom().
ErrorNumber: 10054
Block: 1
App ID: Cisco Tftp
Cluster ID: VS01RYNDE-AS46-Cluster
Node ID: 10.240.46.25
Explanation: NonTimeout error occurred during call to recvfrom().
Recommended Action: Ensure your system is connected to the
network. Check windows Taskmanager to make sure TFTP is getting
sufficient processor
time to serve files. Make sure you are following configuration guide
recommendations for your system configuration..
This error is occuring quite frequently and does not seem to be having any affect on the performance of the installation. This is on a publisher running 3.1(4b) Serv pack D in a cluster with 2 subscribers.
Any help/advice on this would be greatly appreciated.
Thanks
Chris
03-01-2004 07:53 PM
Hi,
Try restarting the Cisco TFTP service on the CallManager. I usually see these errors due to some sort of network related issue causing the TFTP server to resynchronize.
HTH
Kevin
03-03-2004 07:55 AM
Kevin,
Thanks for the reply, I did try this but it proved unsuccessful. However, I have since found that the problem seems related to a hardware conference bridge resource that is no longer registered to the pud due to a faulty switch port. I am waiting a swap out of the cat blade to confirm.
Cheers
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide