07-04-2011 08:56 AM - edited 03-13-2019 07:26 PM
Hi,
I am trying to use a Cisco DMP 4310 with a standard power injector (PRJ3) but it seems that the DMP doesn't start.
I tried using the power injector with a phone and also with a wireless access point, it is working.
I also tried to plug the DMP to a POE switch, the dmp starts.
Is the DMP 4310 compliant with standard power injector ?
Thanks.
07-05-2011 05:05 AM
Hi Paul,
The DMP should be compliant with standard POE but it seems that it needs quite some power to operate so maybe the injector you are using doesn't provide enough.
Regards,
Nicolas
07-05-2011 11:53 PM
Hi,
It seems that the Power Injector delivers enought power but I will try with a PoE+ power injector. In the power injector's datasheet there is nothing about a 802.3af (standard for PoE) compliance so I will try with a compliant power injector. I will let you know if I found the answer.
Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: