Is anyone have problems with Cisco LCD 100 PRO 40N monitors, not sure what happened but at least 3 of our monitors out of 7 are not producing any audio signals, all monitors are using HDMI feeds, all are showing images but 3 have no sound soming out of them. Would this be a hardware issue or a software issue?
I am writing this blog for work around for the following error while pulling the CDR resports "10021 there are no matching records".
Please follow the below work around:
Please verify the CDR configuration on System->S...
I tried to upgrade the firmware of my Cisco 7960 into SIP using a CISCO 2811 router and a CISCO 2960 switch. The upgrade is successful, but the IP phones keep on showing UNPROVISIONED SIP. How could I fix this. I'm trying to build an IP telephony sys...
I have a customer that is running CME 12 and all of his phones located at the office where the CME resides work just fine. We just connected a satellite office to it using a ASA to ASA Site to Site VPN Tunnel. The remote site is work...