04-16-2014 12:46 AM - edited 03-13-2019 08:32 PM
Hi all.
recently we are working on this scenario to send and receive faxes. the offramp portion does not work at all but the onramp section works with problems. the problem is that sometime just the portion of the pages that we send via fax machine are received by mail accounts (for example half a a page). my configs are as follows:
c2921(config-dial-peer)#do sh run
dial-peer voice 33 pots
service onramp-app
incoming called-number ...
direct-inward-dial
port 0/0/0:15
dial-peer voice 99 mmoip
service fax_on_vfc_onramp_app out-bound
max-conn 48
destination-pattern 866
information-type fax
session target mailto:faxinbox2@test.fax
dial-peer voice 29 mmoip
service offramp-app
information-type fax
incoming called-number 8..
image encoding MH
image resolution fine
dsn delayed
dsn success
dsn failure
dial-peer voice 54 pots
max-conn 48
destination-pattern 8..
direct-inward-dial
port 0/0/0:15
forward-digits all
dial-peer voice 98 mmoip
service fax_on_vfc_onramp_app out-bound
max-conn 48
destination-pattern 868
information-type fax
session target mailto:faxinbox1@test.fax
!
!
ip domain name test.fax
!
fax receive called-subscriber $d$
fax send transmitting-subscriber $s$
fax interface-type fax-mail
mta send server 10.1.1.101 port 25
mta send subject "mail from fax"
mta send origin-prefix "cisco-powerred Fax System"
mta send postmaster pm@test.fax
mta send mail-from hostname router.test.fax
mta send mail-from username $s$
mta send return-receipt-to username $s$
mta receive aliases test.fax
mta receive maximum-recipients 48
mta receive generate permanent-error
!
application
service offramp flash:app_faxmail_offramp.2.0.1.1.tcl
!
service fax_detect flash:app_fax_detect.2.1.2.4.tcl
!
service onramp-app flash:app_faxmail_onramp.2.0.1.3.tcl
!
in the above configuration, I've created two dial-peer for to internal fax numbers (866 and 868) so if fax is sent to 866, the mail is sent to "faxinbox2" mail account and the fax is sent to 868 is delivered to "faxinbox1" mail account. sometime the pages are delivered completely and correctly to mailboxes, but sometime just the half of the pages are faxed. I've tried this on many fax machines. any help would be appreciated. tnx.
05-02-2014 01:24 AM
I tried to configure T37 onramp/offramp fax in my network but after several attempts I failed to apply it completely and just portion of that worked well. despite describing the scenario in many forums (like here), I got nothing!
anyway, I'm going to test it in a simple form. I mean, I want to connect my edge router to PSTN line via an FXO port and via ethernet to internal network. my internal network has many physical fax machines that have gotten their internal tel numbers (like 866, 867, ...) from PBX . so can I use this scenario to configure the router to support these fax machine, or I should connect fax machines directly to router through FXS ports? tnx.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide