cme ephone-hunt

[p.holley]

Hi

I have the following config

ephone-hunt 1 sequential

pilot 550

list 551, 552, 553, 554, 555, 556

final 601 (Auto Attendant DN)

preference 1

timeout 6

When the caller calls 550, and gets routed to the last hunt-DN(556), I get a busy signal. If I change my list to "List 551, 552, 553, 554 or anything less the 4 hunt-DN..the call gets to the final 601(AA).

Any ideas

Thanks

[mcotrone]

What IOS ver are you on and CME Ver?

Also are all of the phones Ephones, FXS, or both?

Thanks

[daveg]

Try: -

conf t

telephony-service

max-redirect 9

ephone-hunt 1

hops 6

exit

exit

wr

For more information: -

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps5207/products_configuration_guide_book09186a00801f106e.html

[p.holley]

I am running ios ver c2600-spservicesk9-mz.123-7.T.bin, and CME 3.1.

I do not have the "hop" option under ephone-hunt cmd. But I think the max-redirect cmd under telephony-service was sufficient to make it work. Thanks