10-11-2010 05:31 AM - edited 03-13-2019 07:10 PM
I'm having some issues converting video using VLC. I'm tring to converting some files as .wmv, .avi and mp4 to mpg but some files work well and some of then doesn't work in DMP 4400.
Please what software can you recommend to me and a good parameters to convert then.
Solved! Go to Solution.
10-11-2010 09:08 AM
Lucio,
I would suggest looking at the Cisco MXE-3500:
Cisco Media Experience Engine (MXE) 3500
http://www.cisco.com/en/US/partner/prod/collateral/video/ps9901/ps10631/data_sheet_c78-565206.html
For 3rd party software based solutions, I have had
success with:
* VLC
* Visual Hub
* Prism Video Trancoder
* Any Video Converter
* Kigo Video Converter
* MAC Video Converter
* iSkySoft Video Converter
Make sure that you check the DMP-4400 Data Sheet to verify
that you are using the correct video formats to be played on the DMP:
http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps7220/data_sheet_c78-480272.html
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.
10-11-2010 09:08 AM
Lucio,
I would suggest looking at the Cisco MXE-3500:
Cisco Media Experience Engine (MXE) 3500
http://www.cisco.com/en/US/partner/prod/collateral/video/ps9901/ps10631/data_sheet_c78-565206.html
For 3rd party software based solutions, I have had
success with:
* VLC
* Visual Hub
* Prism Video Trancoder
* Any Video Converter
* Kigo Video Converter
* MAC Video Converter
* iSkySoft Video Converter
Make sure that you check the DMP-4400 Data Sheet to verify
that you are using the correct video formats to be played on the DMP:
http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps7220/data_sheet_c78-480272.html
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.
10-11-2010 10:03 AM
Lucio
Also check out Canopus Procoder and Autodesk Cleaner. These are two commonly used professional grade encoding software packages that are found in most pro video production shops. They allow a higher degree of control over your encode as compared to some of the prosumer packages mentioned by Tom. The ones mentioned by Tom will work fine, I just mention these as they have additional features that make them compelling purchases for a pro level deployment.
Cheers
C.O. Little
10-11-2010 11:27 AM
Thank you I appreciate.
11-02-2010 07:59 PM
Hi T,
We are trying to use the Cisco MXE 3500 for video conversions. For this , we are developing our custom based application and when we tried to look out for some API documentation for MXE 3500 to control and pass the commands to it, we are not able to find any documentation for that. So can you please help us out to find the proper location of it.
Thanks,
JK
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide